 Posted: Mon May 04, 2009 12:57 pm Post subject: |
|
| Thanks to John and Alex for allowing me to take some measurements from their 16v coils.
I got Primary 0.9 & 0.9 Secondary 6.4 & 5.74 Also another 16v owner said "Hi Al - measured coil on a 33 16v with ML4.1 and I think the original coil and the primary winding is .8 Ohms. Could not check secondary as the coil lead is very tight and did not want to break it !! Hope this helps" |
|
| Posted: Fri May 01, 2009 10:46 am Post subject: |
|
| another member measured 10 coils for me, not sure from what model though.
"All my coils showed 1.1 ohms on the 200 setting, outer to outer Inner to outer read, 7.5, 7.0, 7.1, 8.1, 7.9, 14.1, 12.4/11.8, 5.5, 7.7 & 7.7" |
|
| Posted: Wed Apr 22, 2009 1:25 pm Post subject: |
|
| any 16v / p4 owners got a spare 5 mins to help me out?? Paul.h ???? | |
| Posted: Tue Apr 21, 2009 10:48 am Post subject: |
|
| could someone please take some measurements from their coil.
Thanks |
|
| Posted: Fri Jan 09, 2009 12:41 pm Post subject: |
|
| Hi
Bosch seem to give up on some part numbers. There are some relays they used to make that they no longer list (unfortunatly could do with some for the Maserati). All the best Keith |
|
| Posted: Wed Jan 07, 2009 7:19 pm Post subject: |
|
| ok...
i looked in a bosch book dated 92-93 and it had my coil for my car??? |
|
| Posted: Wed Jan 07, 2009 2:42 am Post subject: |
|
| I went to a Lucas dealer and asked him to look up the bosch part number, but there was no coil listed in his book for a 16V?????
My bosch coil has this part number on the bottom 0 221 122 427, however this is not listed at all in his part book??? I went to halfords and they list a bosch part number of 0 221 122 344, so I went back to the Lucas dealer and they are listed at £27.28+vat Something doesn’t add up here, has someone just fitted any old coil to mine? Could someone, or all of you, please post up your Bosch only part numbers for your coils and say what its for, 16V, IE, 8v ect, thanks |
|
| Posted: Wed Sep 17, 2008 1:54 pm Post subject: |
|
| Anyone know what the readings should be? In a service manual it says check readings are within manufactures tolerances and if not replace but doesn’t say what they are??? | |
| Posted: Sun Sep 14, 2008 7:26 pm Post subject: coil values?? |
|
| what are the resistance specifications for our specific coil?
on mine they are Primary, outer to outer 0.9 on the 200 ohms Secondary, inner to outer 5.82 on the 20k ohms my second hand spare reads Primary, outer to outer 1.3 on the 200 ohms Secondary, inner to outer 5.27 on the 20k ohms are mine not good? |
|