Author	Message
BigAl	Posted: Fri Nov 14, 2008 5:15 pm    Post subject: apologies people, my memory has failed me, doh! i only swapped the cross member from my red ser 3. Thanks
BigAl	Posted: Thu Nov 13, 2008 7:41 pm    Post subject: thanks john, i must be getting old coz when i zoom in i still cant make it out
john 33_16v	Posted: Thu Nov 13, 2008 5:22 pm    Post subject: http://www.alfisti.co.uk/mingalPage.htm This shows 1700 s2 frontx-member from my Dads Minari build. John
BigAl	Posted: Thu Nov 13, 2008 3:29 pm    Post subject: i am confused, maybe someone fitted a 16v cross member to my yellow ser 2 then as the 16v engine cam belt covers fit and you say that the 8v dont have the pits so a 16v wont fit.
john 33_16v	Posted: Thu Nov 13, 2008 2:21 pm    Post subject: The 16v one has shapes 'pits' to clear the large timing belt covers. Pics of Bobbbers here: http://www.alfa-pages.co.uk/viewtopic.php?t=5221 john
BigAl	Posted: Wed Nov 12, 2008 7:29 pm    Post subject: ok, so would a ser2 on a ser3 cause any probs or not be as good as it should? Anyone got any pics of the difference?
paulhide	Posted: Tue Nov 11, 2008 11:05 am    Post subject: S2 front cross member is a different shape to the 16v S3.
BigAl	Posted: Tue Nov 11, 2008 1:52 am    Post subject: Thanks Zenith, could you elaborate a little, by sway bay do you mean anti roll bar? I swapped my front cross member and everything from my 8v to my 16v due to bushes and was curious.
ZeNiTh-PbArM	Posted: Tue Nov 11, 2008 12:13 am    Post subject: Hi, Yes the front sway bar will be specific to the 16V because the cylinder heads are getting in the way. Regards, zp
BigAl	Posted: Mon Nov 10, 2008 10:33 pm    Post subject: front cross member differences Is there any difference between a ser 2 1.7 1988 complete front cross member and all arms, compaired to a ser3 1.7 16v 2003?