| View previous topic :: View next topic |
| Author |
Message |
Ketil-no
Alfa Arna
Joined: 08 May 2003
Posts: 20
Location: Bergen-Norway
|
 Posted: Thu Sep 11, 2003 2:25 pm Post subject: WANTED: Wiring loom for a 16v engine |
 |
|
I have bought myself a, hopefully, good 16v engine with low milage.
I want to put this engine in my SW.
But someone have used a cable-cutter on the wirring loom. So I want a complete wiring loom for a 16v with a lambda-sensor. I don't need the head unit.
Is there anyone who can help me with this?
Ketil
Norway
92' 33 SW 1,7 ie |
|
| Back to top |
|
 |
Admin
Site Admin
Joined: 19 Feb 2003
Posts: 1223
Location: Stafford, UK
|
| Posted: Thu Sep 11, 2003 6:28 pm Post subject: |
|
|
Hi
Be aware that there are different engine looms used on different 16V 33's. When I bought another engine for my P4 I had to swap the engine loom over (not much to it) as the connectors to the main loom were different.
All the best
Keith |
|
| Back to top |
|
|
Ketil-no
Alfa Arna
Joined: 08 May 2003
Posts: 20
Location: Bergen-Norway
|
| Posted: Fri Sep 12, 2003 5:49 am Post subject: |
|
|
| Admin wrote: |
Hi
Be aware that there are different engine looms used on different 16V 33's. When I bought another engine for my P4 I had to swap the engine loom over (not much to it) as the connectors to the main loom were different.
All the best
Keith |
Thanks Keith for that info. I see some problem here, since I want to adapt a 16v engine wiring loom into my 1,7ieSW loom. ...But I thought there wasn't so many wires. Since the fuelpump relay and starting relay is in the engine loom?
Do you still have any 16v workshop manual on CD left? I need one...
Ketil |
|
| Back to top |
|
|
Admin
Site Admin
Joined: 19 Feb 2003
Posts: 1223
Location: Stafford, UK
|
| Posted: Fri Sep 12, 2003 12:10 pm Post subject: |
|
|
Hi
Still can do the CD.
The engine loom is tiny. Only about 5 wires really, plus a few seperate sensor wires.
All the best
Keith |
|
| Back to top |
|
|
RpmHead
Alfasud
Joined: 13 Mar 2003
Posts: 52
Location: Oslo, Norway
|
| Posted: Sat Sep 13, 2003 11:47 pm Post subject: Re: WANTED: Wiring loom for a 16v engine |
|
|
| Ketil-no wrote: |
So I want a complete wiring loom for a 16v with a lambda-sensor. I don't need the head unit.
Is there anyone who can help me with this?
|
Hi, Ketil!
Check out the file 'wiring.zip' on this site: http://www.cuoresportivo.pl/__stare33/33_dok.html
_________________
Stian Henriksen, Norway
'92 33 QV S 16V
'66 Giulia Sprint GT Veloce
'69 Giulia Super |
|
| Back to top |
|
|
|
