 |
Alfa Pages A forum for help with the Alfasud And Alfa 33 |
|
View previous topic :: View next topic |
Author |
Message |
Rich B Alfa 33

Joined: 19 May 2003 Posts: 386 Location: Southampton
|
Posted: Mon Jul 24, 2006 4:23 pm Post subject: OMP group N 16v centre box |
|
|
Hi all
Just re-catted my car to get it through the mot (about time too, its been off the road for 7 months!!) and now have an OMP Group N 16v centre box thats surplus to requirements. Generally good condition with no holes (other than at each end!!), quite loud but the sound is awesome! Not sure if these are still available and don't know of anyone else whos got one, so could be quite rare.
As I had it to use as a decat system, I modified it so that the lambda sensor would fit, so if you don't need a lambda probe you could just screw a nut into the threaded hole.
I've mentioned this to Stedee before, so if you want it mate, you've got first refusal (should fit your P4).
No sensible offer refused
Rich |
|
Back to top |
|
 |
matt33 Alfasud
Joined: 29 Jun 2005 Posts: 72 Location: South Staffs
|
Posted: Sun Aug 06, 2006 5:45 pm Post subject: |
|
|
hello Rich, i would be deffinately interested in the centre box if it still available,and if it is suitable for my 94 16v with a supersprint back box??.
collection would be no problem as i get around all the time with work, but it would be a weekday if thats ok?.
how much you looking for it?
cheers,
Matt |
|
Back to top |
|
 |
Rich B Alfa 33

Joined: 19 May 2003 Posts: 386 Location: Southampton
|
Posted: Mon Aug 07, 2006 10:52 am Post subject: |
|
|
Hi Matt
Thanks for your interest - it will fit your car but you'll need to fit a non-cat manifold (I may be teaching you to suck eggs but on your car the manifold has crossover pipes and ends in a flange with 3 holes in it. This flange meets the flange on the cat centre box and the two parts are held together with 3 bolts with a metal gasket in between). You could modify your existing manifold, but if you want to re-cat your car, its much easier to swap the manifolds over. As I mentioned, the centre box I have is modified for the lambda probe to fit straight in, so no messing about with the ECU will be required.
I think I paid about £150 for this part a few years ago, so how does £30 sound? I'm in South Wales near Cardiff and could meet you somewhere in the South West if you like, or if you want to come all the way over here that's fine. Weekdays generally no problem as I work shifts.
Cheers
Rich |
|
Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|