Alfa Pages
A forum for help with the Alfasud And Alfa 33
Welcome
Forums
∇
Main Forum
∇
Alfa Pages Forum Index
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
Old discussion list
Alfa 33 Info
∇
Alfa 33 History
Unleaded Fuel
Gearbox Ratios
Fuel Injection
Tuning
Wheel Offsets
ML4.1 Injection
Manuals
Seat Modification
Speakers
Suspension Tuning
Rear Spring Rates
Suspension Overview
Special Tools
Links
∇
Links
Gallery
∇
Events
∇
Science Museum Alfa Show
Auto Italia at Castle Donington
My Hydrauliced Engine
Spring Alfa Day, 2009
Houten 2005
Spring Alfa Day, 2007
Series 1
∇
Three pictures of P4, with a very highly polished
The series 1 Giardinetta of Anthony Stoner.
The series 1 Green Cloverleaf Ian Kanik.
The series 1 33 of from Aus.
The series 1 33 Green Cloverleaf Alex Pape from Me
The Alfa 33 of Steven McNaught of Brisbane, Austra
The Alfa 33 of Andrew Mabbott of New South Wales,
Series 2
∇
A pair of Alfa 33's owned by Tony Corps
The series 2 33 of Jorge Vazquez
The series 2 TD of Llewellyn Oliver in South Afric
The series 2 Sportwagon with the Veloce kit of Hug
The Alfa 33 of Kris.
The Alfa 33 of Michael Petersen of Denmark.
Series 3
∇
A P4 emulating a P2 for the amusement of David Mac
The series 3 16V 33 of Roland Westerberg
A Alfa 33 16V owned by Lars Hoygaard Michaelsen.
The Alfa 33 owned by EmilianoÿCuria.
The Alfa 33 of Paul Devrieze.
Gritsops 1.4IE
Sprint
∇
The Alfa Sprint of Ken McCarthy.
The Alfa Sprint of Keren.
Alfa Pages Forum Index
->
General
Post a reply
Username
Subject
Message body
Emoticons
View more Emoticons
Font colour:
Default
Dark Red
Red
Orange
Brown
Yellow
Green
Olive
Cyan
Blue
Dark Blue
Indigo
Violet
White
Black
Font size:
Tiny
Small
Normal
Large
Huge
Close Tags
Options
HTML is
OFF
BBCode
is
ON
Smilies are
ON
Disable BBCode in this post
Disable Smilies in this post
Security Question
What is H20
Hydochloric Acid
Water
Suphuric Acid
All times are GMT + 1 Hour
Jump to:
Select a forum
Global 33 Forums
----------------
General
Car Chat
Motorsport, Racing & Trackdays
Boxer Workshop
Boxer Restoration
For Sale & Wanted
Spotted A boxer Alfa
Gallery
General Forums
----------------
Introduce Yourself
Jokes & Funnies
Local Forums
----------------
UK
Mainland Europe
Australia & New Zealand
South America
Topic review
Author
Message
Admin
Posted: Mon May 25, 2009 3:08 pm
Post subject:
Hi
Could just be bad luck it landed there.
All the best
Keith
BigAl
Posted: Fri May 22, 2009 4:30 pm
Post subject:
it was suggested by another mechanic that the spring came off during fitting I spoke to the mechanic who fitted it and he said no, he's fittted loads of bearings, never had that, always checks and it prob came off when the front bearing race was being punched out, look at the spring and you will see no scoring or damage to it.
BigAl
Posted: Tue May 12, 2009 9:25 pm
Post subject:
No oil Keith, it was wiped clean. How embarrassed am I, that spring is from the rubber seal.
Admin
Posted: Tue May 12, 2009 4:14 pm
Post subject:
Hi
In those pics the race just looks like it has some oil on it.
Not seen a spring doing that before either.
All the best
Keith
BigAl
Posted: Mon May 11, 2009 5:43 pm
Post subject:
A picture says a thousand words, so heres 7000
How pitted is the race, can you see the roller retention spring jamming between the inner and outer race? I have never seen that before!
BigAl
Posted: Sun May 10, 2009 9:29 pm
Post subject:
The bearings were replaced on Thursday night. The mechanic was a bit concerned because after packing both new bearings, they still felt dry. The rollers were not rolling free. If there were other bearings to hand he would not have fitted them. He hopes they will loosen up after being loaded and asked me to bring the car back after 100 miles to check. In hindsight the bearings should have been packed before removing the old ones. I asked him how come he didn’t do so and he said that he never has, you don’t expect new bearings to be faulty and they could just order new ones.
The date on the box of the new bearings is quite old and the protective coating of I think oil had become solid and some rollers were not spinning free.
Has anyone else experienced this?
The last set seemed ok but after about 6 months failed.
BigAl
Posted: Fri Mar 20, 2009 1:07 pm
Post subject:
Well upon further inspection the inside offside bearing is "excessively rough" There was no water damage as the seal was replaced and intact, it was not overtightened, it was not loose, it was not dry and had no excessive play. The bearing casing was shot.
I now have to get an advanced replacement under warranty.
What joy
BigAl
Posted: Wed Mar 04, 2009 1:15 pm
Post subject:
I should have said that i did the bearing properly.
http://www.alfa-pages.co.uk/viewtopic.php?t=5543&highlight=brake
11th post down
Quote:
I just looked at the manual and found the correct way to do nut.
Tighten to 25 - 29Nm while rotating drum 4 or 5 turns in each direction, partially slacken nut and strike stub shaft with a mallet, then hand tighten to specified torque.
Then goes on about checking end float, which i dont have and peening over nut when done.
minus the 25-29Nm and used the tried and tested alfa mechanics way of letting the woosy bar drop.
eagle3
Posted: Wed Mar 04, 2009 8:19 am
Post subject:
You can usually get a good idea just by lifting each wheel on the jack and turning it.
You may have overtightened the hub nut. You're supposed to slacken it off a tad once the bearing is properly seated. If that's the case, get another bearing kit(or two) and start again.
The correct procedure for tightening is to turn the drum whilst tightening the nut to a specified torque(about 20lbf ft) to seat the bearing. Once it's seated, slacken the nut slightly, tighten it as far as you can with your fingers without disturbing anything and block the nut on the thread with a punch. Then tap the end of the thread with a mallet to make the outer bearing sit against the washer. There needs to be a tiny amount of play.
BigAl
Posted: Wed Mar 04, 2009 12:44 am
Post subject: wheel bearing noise
Hey guys, i recently replaced my rear wheel bearings, both sides both inner and outer. A mechanic friend helped me out. Now i am no mechanic but consider myself quite competent when working on my car as i have owned 2 ser 2's and 2 ser 3's. I have done this job in the past with no problem but the rear wheels would always work loose slightly. I packed the bearings and my mechanic friend said they are ok, the old bearing shells were punched out and the new ones fitted. Now i checked the nut was tightened correctly, hold the woosy bar at the top and let it drop, normally 90 degrees. All seemed ok and i checked for settling in after a few months there was no looseness.
Now i am getting a bearing noise, can it be from the rears? It sounds like it is but surely it cant be.
Here's my question, finally i hear you say.
Can a front wheel bearing that is failing sound like it is coming from the rear?
Can you remove the rear bearing rubber seal without damaging it to repack with grease?
I have to fit new pads at the front and the shoes were low at the mot so i thought i would replace the rear shoes at the same time, so i thought i might as well have a look.
Thanks
Alan