Author |
Message |
Topic: alfa boxer 16v ignition mapping |
neo
Replies: 5
Views: 10001
|
Forum: Motorsport, Racing & Trackdays Posted: Sun Feb 11, 2007 4:03 pm Subject: alfa boxer 16v ignition mapping |
I was using this map for my ignition on 16V engine. Use with 98 octane fuel.
Compression ratio was 10.5:1.
Check that the mixure is rich enough or else you'll get slight detonation over 5500 rpm. ... |
Topic: rear wheel bearing |
neo
Replies: 0
Views: 1110
|
Forum: Boxer Workshop Posted: Mon Feb 05, 2007 10:15 pm Subject: rear wheel bearing |
Hi!
Is it possible to change the rear wheel bearing on a 33 with a rear disk brakes and ABS or you need to change the entire hub?
I've been looking for the bearing in the SKF catalog and there i ... |
Topic: alfa boxer 16v ignition mapping |
neo
Replies: 5
Views: 10001
|
Forum: Motorsport, Racing & Trackdays Posted: Mon Jan 29, 2007 1:12 pm Subject: alfa boxer 16v ignition mapping |
I have one. I`ll post it when I get home from work. |
Topic: rear brake disc conversion |
neo
Replies: 8
Views: 3383
|
Forum: General Posted: Sun Nov 05, 2006 10:17 pm Subject: rear brake disc conversion |
Ok!
Thanks!
I think that the parts won't be a problem since I'm very near Italy . |
Topic: idle mixture adjustment on 16V |
neo
Replies: 8
Views: 3822
|
Forum: General Posted: Wed Nov 01, 2006 12:35 pm Subject: idle mixture adjustment on 16V |
I've checked everything. No errors on the ECU, all sensors reading normal. The thing is that this is not the original ecu instalation from my engine. It came from a donor engine. Including all sensors ... |
Topic: idle mixture adjustment on 16V |
neo
Replies: 8
Views: 3822
|
Forum: General Posted: Tue Oct 31, 2006 7:36 pm Subject: idle mixture adjustment on 16V |
Air filter is new. |
Topic: idle mixture adjustment on 16V |
neo
Replies: 8
Views: 3822
|
Forum: General Posted: Tue Oct 31, 2006 7:16 pm Subject: idle mixture adjustment on 16V |
Hi!
I've measured the emissions of my engine and I got the following results:
CO=2.37%
O2=1%
CO2=9.5%
HC=330 ppm
The car is a non cat and witouth a lambda probe. Engine code is 307.46. The ... |
Topic: rear brake disc conversion |
neo
Replies: 8
Views: 3383
|
Forum: General Posted: Tue Oct 31, 2006 7:08 pm Subject: rear brake disc conversion |
Hi!
I've managed to get the rear calipers with the mounting bracket for the 33. I now have classic drums on the rear brakes. Do I need anything else to do the conversion?
Thanks! |
Topic: relay with a diode |
neo
Replies: 6
Views: 2176
|
Forum: General Posted: Wed Sep 27, 2006 9:36 am Subject: relay with a diode |
Hi!
I've looked at the link. So the diode is used to protect transistors and IC (in case that they activate the coil in the relay) when the relay is powered off.
But the main relay is activated ... |
Topic: relay with a diode |
neo
Replies: 6
Views: 2176
|
Forum: General Posted: Mon Sep 25, 2006 8:55 pm Subject: relay with a diode |
I've noticed that the relay (S12b) that powers on the motronic ECU on the 1.7 16V engine has a diode in the circuit that activates the relay (pins 85 - 86). What is the diode for? Can I use a normal r ... |
Topic: 1.7 16V engine wiring harness |
neo
Replies: 2
Views: 1676
|
Forum: General Posted: Sun Sep 17, 2006 11:55 pm Subject: 1.7 16V engine wiring harness |
I've checked the page. I've figured out those two diag connectors. As for the ignition advance, there is a table on that page. It says: yellow relay -> 95 octane fuel -> with lambda probe. But m ... |
Topic: 1.7 16V engine wiring harness |
neo
Replies: 2
Views: 1676
|
Forum: General Posted: Sun Sep 17, 2006 7:30 pm Subject: 1.7 16V engine wiring harness |
Hi!
I'm assembling the wiring on the 16V engine. I've managed to find out what are all the connectors used for except the three connectors shown on the image (two connencors and the short-circuited ... |
Topic: Whats your MPG / total miles per tank? |
neo
Replies: 70
Views: 22185
|
Forum: General Posted: Mon Aug 07, 2006 10:20 pm Subject: Whats your MPG / total miles per tank? |
I did 43 MPG with a 1.7 16V engine, 2 pearsons and a fully loaded trunk. No CAT, but standalone fuel management with lambda correction. It was all mostly open road, and maybe 15% city driving.
I've ... |
Topic: struts difference |
neo
Replies: 3
Views: 1678
|
Forum: General Posted: Mon Jul 10, 2006 10:39 pm Subject: struts difference |
Hi!
I'd like to know if there are any difference between the struts with 4 bolts?
Thanks! |
Topic: alternator question |
neo
Replies: 8
Views: 2937
|
Forum: General Posted: Fri Jul 07, 2006 1:48 pm Subject: alternator question |
Neo
it is ok for car of that age. Best I could get from my P4 are exact same measurments.
At its peak, when everything is in great condition, you'll get 14.4V exact at idle, and maybe 14.1-14.2 wi ... |
Topic: alternator question |
neo
Replies: 8
Views: 2937
|
Forum: General Posted: Fri Jul 07, 2006 8:58 am Subject: alternator question |
Yes, I've measured the voltage on the battery terminals.
Thanks! |
Topic: alternator question |
neo
Replies: 8
Views: 2937
|
Forum: General Posted: Thu Jul 06, 2006 8:07 pm Subject: alternator question |
Hi!
I had a problem with the alternator. When I turned on the lights and the ventilator, the battery light on the dashboard started to lit a bit. Then I measured the voltage and I got 12.8 volts. I ... |
Topic: Gearbox differences... |
neo
Replies: 9
Views: 2749
|
Forum: General Posted: Wed Apr 19, 2006 4:01 pm Subject: gearbox |
Hi!
I had a 1.3 engine and I've replaced it with 1.7 16V. I'm using the gearbox from the 1.3 engine, and it has that hole needed for the pick-up for the injection. The car is 3rd series.
The only ... |
Topic: fuel tank protection |
neo
Replies: 5
Views: 2159
|
Forum: General Posted: Sun Mar 05, 2006 12:54 pm Subject: fuel tank protection |
Hi!
Does anyone have an idea how to protect the fuel tank from rusting from the inside?
Thanks! |
Topic: How much can be safley taken off 1700 pistons |
neo
Replies: 2
Views: 2056
|
Forum: Motorsport, Racing & Trackdays Posted: Sun Dec 18, 2005 10:25 pm Subject: Re: How much can be safley taken off 1700 pistons |
How much can we safely take off the top of the piston to get the compression ratio up.
If you do that you will lower the compression ratio. |
Topic: starter spacer thickness |
neo
Replies: 2
Views: 1631
|
Forum: General Posted: Tue Jun 14, 2005 11:48 am Subject: starter spacer thickness |
where r u from?
Rijeka, Croatia |
Topic: starter spacer thickness |
neo
Replies: 2
Views: 1631
|
Forum: General Posted: Mon Jun 13, 2005 11:35 pm Subject: starter spacer thickness |
Hi!
I'm having trouble finding the 16V starter spacer so i decided to make one, but I don't know the tickness.
So if anyone knows or it can measure it I'd be very thankful.
Best regards
Nena ... |
Topic: conrods |
neo
Replies: 2
Views: 1611
|
Forum: Boxer Workshop Posted: Fri May 06, 2005 8:58 pm Subject: conrods |
I've assembled the engine that way in the end. I was confused with that picture in the manual where you can see the engine in exploded view. In that picture the left bank cilinders have the conrods ro ... |
Topic: conrods |
neo
Replies: 2
Views: 1611
|
Forum: Boxer Workshop Posted: Sun May 01, 2005 7:04 pm Subject: conrods |
Hi!
Can anyone post me a picture or explain me the conrods orientation? I've looked in the workshop manual but on some pictures they are turned one way and on the other pictures the other way. I th ... |
Topic: some info needed |
neo
Replies: 0
Views: 966
|
Forum: General Posted: Sun Feb 20, 2005 5:19 pm Subject: some info needed |
Hi!
How can you tell the difference if the piston is made by borgo or mondial? I've looked closly the pistons, but nothing is marked except the direction arrow, size and class. On the inner side is ... |
|