View previous topic :: View next topic |
Author |
Message |
LDA Alfa 33
Joined: 28 Nov 2004 Posts: 276 Location: France
|
Posted: Wed Aug 24, 2005 4:39 pm Post subject: the project so far... |
|
|
hey all,
well so far i havent got that much done to the alfa. i have been spending most of my time working on either getting new parts in or pulling bits off the subaru.
today was meant to be the day for pulling all the big bits off but the weather has put pay to that
so If the weather clears up tomorrow then i should have the car stripped by the weekend.
then comes the fun bit.. test fitting the engine and gearbox into the chassis. i know it will fit in the hole but i havent worked out the mount points etc yet.
i'm going to try and take some photos as i go. so people can see how to take the alfa parts off and pics of the subaru parts going in just for entertainment.
with any luck i should have a running car by the middle end of september. it wont even be close to finished by then but if it runs by then i'll be a happy man.
anyone know any sun dances?
L. _________________ A good workman allways blames his sh*t tools. |
|
Back to top |
|
|
Edward Alfa 33
Joined: 21 Sep 2003 Posts: 307 Location: Bristol
|
Posted: Mon Sep 12, 2005 9:27 pm Post subject: |
|
|
Hi,
Hopefully not to far behind you on my project, the shell is now a rolling shell ready for the roll cage and other parts, still need to sort an engine from a Subaru, but at least the progress is constant - even if it is slow. Would welcome the photos. I am going to try and mate a 33 'box to the Subaru engine and see if that works best for me.
Let me know how you get on.
Edward. _________________ The faster the better. |
|
Back to top |
|
|
LDA Alfa 33
Joined: 28 Nov 2004 Posts: 276 Location: France
|
Posted: Tue Sep 13, 2005 9:18 pm Post subject: |
|
|
hmm. i was going to use the alfa box to start with.. then i found out that they cant take more than 220bhp before they fall apart. the case even cracks at about 250hp!
this is why i have ended up using the subaru box.
are you going 4wd with your car or is it a front wheel drive 33?
so far i'm still stripping the 33 but there isnt a lot left to take off now. had a good day on it today.
mine is also a rolling shell atm but with the wrong suspension and axels on it. need to lose all the alfa suspension and rear axel but havent got an s14 rear subframe to replace the axel yet.
looks like my chassis is solid but the front wings have had it. and the drivers door has a large rust spot in the middle right at the bottom. only rust on the chassis is round the fuel filler. but thats ok cos thats going anyway.
next step is working out the subaru engine mount points. i'll post up my workings on this as you will need this info.
for an engine etc you might want to look here http://www.silverlakeautoparts.co.uk/breakers.aspx
thats where i got my subaru from. looks like there is a p1 there over 300bhp engine in that one
i'm doing some extra welding on my car when i get the rollcage installed. the front chassis legs either side of the engine have got a support brace on the p4. i'm dumping them and replacing them with a larger weld in bit of roll cage tube. gotta get the engine in place before i can do this tho. dont want to get itn the way of anything.
L. _________________ A good workman allways blames his sh*t tools. |
|
Back to top |
|
|
|