View previous topic :: View next topic |
Author |
Message |
Dreamracers Alfa Sprint
Joined: 19 May 2003 Posts: 236 Location: Sunny Zomerzet, UK
|
Posted: Tue Mar 14, 2006 5:38 pm Post subject: ..WANTED.. Sud rear hub/stub axle components.... |
|
|
Help!!! Had a bearing fail in a big way on our latest test, and one of the races decide to weld itself to the stub axle.
We have new bearings etc.. but need a new stub axle and/or the plates it attaches to. (on the left, below)
Also - washer to go between the bearing and the hub nut - it disintegrated (one good one is pictured on the right, below).
Or can anyone suggest a good breakers???
_________________ (00=\°/=00) (00=\°/=00)
Alfasud 1.7Ti & Alfasud 1.3Ti
|
|
Back to top |
|
|
suddy Guest
|
Posted: Tue Mar 14, 2006 8:13 pm Post subject: Re: ..WANTED.. Sud rear hub/stub axle components.... |
|
|
Dreamracers wrote: |
Help!!! Had a bearing fail in a big way on our latest test, and one of the races decide to weld itself to the stub axle.
We have new bearings etc.. but need a new stub axle and/or the plates it attaches to. (on the left, below)
Also - washer to go between the bearing and the hub nut - it disintegrated (one good one is pictured on the right, below).
Or can anyone suggest a good breakers???
|
Got one! Give me a bell on 07886 192806 |
|
Back to top |
|
|
Tenman Alfa Arna
Joined: 19 Dec 2005 Posts: 12 Location: Blackburn
|
Posted: Fri Mar 17, 2006 12:34 am Post subject: |
|
|
I'll be breaking a sud very soon, just got a donor car for a few bits for my TiX... |
|
Back to top |
|
|
ad Alfa Arna
Joined: 25 Sep 2003 Posts: 6 Location: Wilts
|
Posted: Sat Mar 18, 2006 11:55 pm Post subject: sud rear hub |
|
|
Mark,
I have a complete assembly (with disc still attached) that is yours if any of the other offers do not work out.
As I am in west wilts I could probably gey this to you within 30 mins.
thanks,
ad |
|
Back to top |
|
|
Dreamracers Alfa Sprint
Joined: 19 May 2003 Posts: 236 Location: Sunny Zomerzet, UK
|
Posted: Sun Mar 19, 2006 8:11 pm Post subject: |
|
|
Cheers guys. Have sorted the bit and will be fitting it tomorrow...! _________________ (00=\°/=00) (00=\°/=00)
Alfasud 1.7Ti & Alfasud 1.3Ti
|
|
Back to top |
|
|
|