View previous topic :: View next topic |
Author |
Message |
tempra2 Alfasud
Joined: 27 Feb 2007 Posts: 46
|
Posted: Fri Mar 30, 2007 8:15 pm Post subject: The Eagle has Landed - My New P4: Pics |
|
|
Thanks for all the help and advice, here's some pics the PO took whch he's kindly let me post:
*Piccys*
55K, FSH and it's as good as it looks! |
|
Back to top |
|
|
tvatavuk Gold Cloverleaf
Joined: 13 Mar 2003 Posts: 673 Location: Split, Croatia
|
Posted: Fri Mar 30, 2007 9:03 pm Post subject: |
|
|
She's a Beauty
Is that metalic dark grey dark beast behind also yours? _________________ Tino Vatavuk
Little black dress which replaced Alfa Romeo 33 S 16v Permanent 4 GMo |
|
Back to top |
|
|
tempra2 Alfasud
Joined: 27 Feb 2007 Posts: 46
|
Posted: Fri Mar 30, 2007 9:21 pm Post subject: |
|
|
Hi Tino!
Sadly not, that's the previous owners 3.2 facelift. He also owns an SZ - top bloke (Obviously: the cars say it all!) |
|
Back to top |
|
|
john 33_16v 16 Valve
Joined: 27 May 2005 Posts: 1406 Location: herts, uk
|
Posted: Mon Apr 02, 2007 7:30 am Post subject: |
|
|
Minter!
Enjoy
John
33 16v '93
145 2.0 Clover '97 (The wifes - sort of!) _________________ If it aint broke, fiddle with it until it is!
- - - - - - - - - - - - - -
93 33 16v Mirtle Met
08 Fiat Grande Punto Exotica Red
90 Yamaha FZR600 Genesis- Silky white/red/blue |
|
Back to top |
|
|
tempra2 Alfasud
Joined: 27 Feb 2007 Posts: 46
|
Posted: Mon Apr 02, 2007 10:38 am Post subject: |
|
|
Cheers John!
This is what I spend yesterday doing: Service items
Only had 5 hours, but managed to:
- Replace the cracked coolant hose from the T’stat to the left side intake.
- Replaced all the other hoses to the t’stat as a precaution and the T’stat itself.
- PAS and Alternator Belts
- Flush and change the coolant
- Change the Engine Oil and filter
- Change the Diff Oil
- Change the Air Filter
- Change the dissy cap and rotor arm
Still need to:
- Change the gearbox oil (The oil from the diff was as new, so I’ve got high hopes that the gearbox oil will be the same).
- Change the fuel filter
- Change the PAS fluid
- Change the plugs
- Take some photos of the goodridge hoses for Tino(!)
- Do the brakes: New lines, discs, fluid and pads – still waiting for the front discs! |
|
Back to top |
|
|
john 33_16v 16 Valve
Joined: 27 May 2005 Posts: 1406 Location: herts, uk
|
Posted: Mon Apr 02, 2007 8:14 pm Post subject: |
|
|
Hi,
I'm assuming you've had a 33 before?
If not, the plugs are a right old fiddle the first time, mostly working by feel with the plug spanner from toolkit. It looks like your p4 has been cherished, so hopefully the plugs will have been previously 'coppaslipped' which helps alot. Take out the airbox, and place a good book or magazine on the intake manifold!
John _________________ If it aint broke, fiddle with it until it is!
- - - - - - - - - - - - - -
93 33 16v Mirtle Met
08 Fiat Grande Punto Exotica Red
90 Yamaha FZR600 Genesis- Silky white/red/blue |
|
Back to top |
|
|
tempra2 Alfasud
Joined: 27 Feb 2007 Posts: 46
|
Posted: Mon Apr 02, 2007 9:08 pm Post subject: |
|
|
Thanks John; yes had a 16v before, but it was cat so the plugs were platinum so I never had to change them.
Got the tools in the kit fortunately, but yes it looks like a PITA!
My specialist advised against the cost of platinum plugs saying that the 16v's always flood and then won't start and the only way to get them going again is to change the plugs. Ever heard of this? My old car was always fine |
|
Back to top |
|
|
john 33_16v 16 Valve
Joined: 27 May 2005 Posts: 1406 Location: herts, uk
|
Posted: Tue Apr 03, 2007 8:56 am Post subject: |
|
|
Hi,
Never known my 64,000miler 16v (with cat) to flood in the 6 years i've had it.
Mine has the platinum plugs, which i've had out a couple of times. I've actually got a brand new set of platinums i got cheap on ebay, which i may whack in when i next service the car if i'm feeling very keen.
Have resprayed nsf door and spoiler in the last 10 days, waiting on brand new marrelli new nsf electric window reg assy (ebay!), then hoping for some time to put in new headlights, new front shocks and strut bearings.
Spent all free time last weekend servicing and tidying the wifes 'new' 145.
Trying to get to Spring Alfa Day for the morning, hope to see you and the p4 there!
John _________________ If it aint broke, fiddle with it until it is!
- - - - - - - - - - - - - -
93 33 16v Mirtle Met
08 Fiat Grande Punto Exotica Red
90 Yamaha FZR600 Genesis- Silky white/red/blue |
|
Back to top |
|
|
Bellamachinna Alfa 33
Joined: 12 May 2003 Posts: 352 Location: Lisbon-Portugal
|
Posted: Tue Apr 03, 2007 3:06 pm Post subject: |
|
|
Quote: |
My specialist advised against the cost of platinum plugs saying that the 16v's always flood and then won't start and the only way to get them going again is to change the plugs. Ever heard of this? My old car was always fine |
Mine does this IF i use the Golden Lodge plugs. It looks like yours, but is the front wheel drive version.
If i use the Golden lodge plugs, especially in damp weather, the car as a tendancy to flood, and the only way to start the car again, is to remove the plugs and clean them....
I switched to NGK plugs, because eventualy they also flood, but the car starts on 3 cylinders, and after warming up, it "switches" the "dead cylinder into life...
I`ve tried everything, to prevent this from hapening (from new injectors, new fuel damper, new plug leads, new plugs, new distributor...The list is long) but sometimes (in damp weather) he fires on 3 cylinders..
When someone gets the cure for this i will be happy to know...
All the best
P.Camilo
P.S.-By the way your car looks Awesome _________________ All'interno della mia macchina, vi sedete, tenete sopra e CHIUDETE IN SU... |
|
Back to top |
|
|
tvatavuk Gold Cloverleaf
Joined: 13 Mar 2003 Posts: 673 Location: Split, Croatia
|
Posted: Tue Apr 03, 2007 4:38 pm Post subject: |
|
|
Camilo,
friend of mine owned FWD noncat 16v with similar but worse problems, he would start engine on two cyls, fuel consumption was from 15-30% more....
He replaced fair bit of things he could replace/plugs,sensors... and check out... after he sold it new owner changed wiring and voila new car. _________________ Tino Vatavuk
Little black dress which replaced Alfa Romeo 33 S 16v Permanent 4 GMo |
|
Back to top |
|
|
tempra2 Alfasud
Joined: 27 Feb 2007 Posts: 46
|
Posted: Wed Apr 04, 2007 11:24 am Post subject: |
|
|
Oh Good - I bought NGK's so hopefully it'll at least go in the morning!
FYI: I asked the specialist if there was anything I can do to prevent the flooding on startup - he said never touch the accelerator on startup helps - don't know if it's true though. |
|
Back to top |
|
|
Bellamachinna Alfa 33
Joined: 12 May 2003 Posts: 352 Location: Lisbon-Portugal
|
Posted: Wed Apr 04, 2007 3:38 pm Post subject: |
|
|
Quote: |
after he sold it new owner changed wiring and voila new car.
|
What wiring did he change???
The wiring for the ECU, or the "normal" wiring???
Or did he changed EVERYTHING????
Quote: |
he said never touch the accelerator on startup helps - don't know if it's true though. |
Yes this is true... But if your car has some vacuum pipe disconnected (like mine had) it simply doesnt start at all, if you dont give it a kick in the pedal...(this problem is already solved in mine)
All the best
P.Camilo _________________ All'interno della mia macchina, vi sedete, tenete sopra e CHIUDETE IN SU... |
|
Back to top |
|
|
daniiodtb Alfa Arna
Joined: 05 Apr 2007 Posts: 1 Location: Poland(zyrardów)
|
Posted: Thu Apr 05, 2007 11:32 am Post subject: |
|
|
Real beauty and great seats Recaro This is my first post on this page and I am happy I could write on your site. |
|
Back to top |
|
|
bobbber P4
Joined: 14 May 2003 Posts: 2162 Location: The Greatest Town on Earth - Swadlincote, UK
|
Posted: Thu Apr 05, 2007 3:09 pm Post subject: |
|
|
Welcome to Alfa Pages!
A new thread telling us a bit about yourself and some photos of your 33 would be great!
Thanks for joining!
Bob _________________ Fiat Bravo 165 Sport |
|
Back to top |
|
|
paddy granger Alfa Sprint
Joined: 12 Aug 2003 Posts: 248
|
Posted: Mon Apr 16, 2007 12:54 pm Post subject: |
|
|
Nice one! How I miss my 33...
Looks like it has had a good history of owners, well done for finding this one. |
|
Back to top |
|
|
twinspark Alfa Arna
Joined: 24 Apr 2007 Posts: 22 Location: Fife, Scotland
|
Posted: Tue Apr 24, 2007 2:08 pm Post subject: |
|
|
Thats very nice mate!
Not alot of difference externally to my Cloverleaf, headlight washers and the different alloys, are they 15's?
....... I want to get badges on the side of mine now after seeing yours! _________________ P17SUT - tourismo internazionale |
|
Back to top |
|
|
tempra2 Alfasud
Joined: 27 Feb 2007 Posts: 46
|
Posted: Wed Apr 25, 2007 9:41 am Post subject: |
|
|
Cheers Twinspark - they the boggo 14" P4 alloys, which I'm quite happy with.
Don't think you can get the small cloverleaf stickers anymore, just the right big ones |
|
Back to top |
|
|
twinspark Alfa Arna
Joined: 24 Apr 2007 Posts: 22 Location: Fife, Scotland
|
Posted: Wed Apr 25, 2007 10:44 am Post subject: |
|
|
tempra2 wrote: |
Cheers Twinspark - they the boggo 14" P4 alloys, which I'm quite happy with.
Don't think you can get the small cloverleaf stickers anymore, just the right big ones |
Maybe should just leave my standard 14's on then......unless I can find a nice set of 155 15" in the split rim style!
I've found plenty of the large side stickers on ebay, but abarth-badges have small proper metal ones for £21 each!.......think i'll just get the big stickers for £3. _________________ P17SUT - tourismo internazionale |
|
Back to top |
|
|
|