Alfa Pages

[Lee]

I need to remove the warning switches from the dash, fog lamps etc, as some are in the wrong places, and some need the lamps replacing.

I got the fronts off ok to replace the lamps, but I cant see how to remove the whole switch, how do they come out.

Earlier series 3 car with the square switches (same as series 2 and 75).

Usually go for the heavy handed approach, but want to do it properly

Thanks lee
_________________
`97 155 2.0 16v sport
`91 33 1.7 I.E

[Ben_nz]

I think you might wanna take the whole surround thingy out of the dashboard like this:

It's not easy because you can't get at the clips to fold them down to allow the surround to slide out. I think the wiring loom plugs go directly onto the back of the switches, and I can't remember if removing a switch by itself would result in the plug disconnecting or whether it passes through the switch surround and comes out with the switch.
_________________
"Now, all that is left to do ... is wait that something else brokens, to fix up again!"

[Lee]

Thanks for the reply, and the picture too, nice one that does help, although as you say might be tricky, will gie it a look at the weekend.

Thanks again
_________________
`97 155 2.0 16v sport
`91 33 1.7 I.E