Alfa Pages

BigAl · P4 Joined: 06 May 2003 Posts: 2995 Location: U.K Surrey

Hello yet again Smile

as you guessed it my tools are being used and the cobwebs have been dusted off them and after removing my throttle linkage bar I noticed that they are very dry and one circlip is missing. Should I replace these or is it possible to re grease or oil, if so what should I use.
_________________
x2 33 16v
pictures http://www.alfa-pages.co.uk/viewtopic.php?t=5203

BigAl · P4 Joined: 06 May 2003 Posts: 2995 Location: U.K Surrey

any one?
_________________
x2 33 16v
pictures http://www.alfa-pages.co.uk/viewtopic.php?t=5203

rsfruitbat · Posted: Tue Apr 29, 2008 5:02 pm Post subject:

Bearings should be sealed. If you can see the balls then thats not good. Replaced mine and have the number if you need it.
Circlip shouldnt really be a problem bearing carriers should hold it all in place. If you need some bearing carriers I think I probably have a couple spare.

rsfruitbat

BigAl · P4 Joined: 06 May 2003 Posts: 2995 Location: U.K Surrey

thanks rsfruitbat
I will prob take you up on that.
You may wonder "whats the point" but whilst im there i might as well do a proper job and may make a smother throttle pedal, along with lubing up the cable itself
_________________
x2 33 16v
pictures http://www.alfa-pages.co.uk/viewtopic.php?t=5203