Alfa Pages

BigAl · P4 Joined: 06 May 2003 Posts: 2996 Location: U.K Surrey

hey guys, i just finished fixing my front door lock but i was too cold to tackle the rear one.
What do you think is causing this problem and how should i go about fixing it?
Is it a common problem, caused by the motor or wiring?
Thanks in advance
Alan
_________________
x2 33 16v
pictures http://www.alfa-pages.co.uk/viewtopic.php?t=5203

paulhide · Posted: Thu Feb 26, 2009 3:24 pm Post subject:

1. cross bar/general lubrication
2. bar needs, lengthening or shortening (if the lock mucks about)
3. wiring fault
4. motor shot (unlikely) (have a spare for 300 quid)
_________________
Owner's Club 33 Registrar. Now from P4 & S2 1.7 QV
http://www.alfa-pages.co.uk/viewtopic.php?t=5188

BigAl · P4 Joined: 06 May 2003 Posts: 2996 Location: U.K Surrey

£300 for a motor that unlocks a door, that's not bad Laughing

think i would prefer an engine that doubles as a food blender.

I have never looked at the mechanism Solenoid, is it an easy logical thing to fix Embarassed

_________________
x2 33 16v
pictures http://www.alfa-pages.co.uk/viewtopic.php?t=5203

paulhide · Posted: Fri Feb 27, 2009 9:34 am Post subject:

9 times out of 10 it will just be lubrication Al.
_________________
Owner's Club 33 Registrar. Now from P4 & S2 1.7 QV
http://www.alfa-pages.co.uk/viewtopic.php?t=5188

BigAl · P4 Joined: 06 May 2003 Posts: 2996 Location: U.K Surrey

sweet, thanks, i need some white grease then
_________________
x2 33 16v
pictures http://www.alfa-pages.co.uk/viewtopic.php?t=5203