View previous topic :: View next topic |
Author |
Message |
Mixsynth Alfa Sprint
Joined: 27 Mar 2003 Posts: 165 Location: Peterborough UK
|
Posted: Mon Apr 14, 2003 10:49 pm Post subject: Series 3 washer fluid bottle - where? |
|
|
I've come up with a dilemma in my 8V->16V engine swap.
Where on earth do you put the washer fluid bottle?
In my series 2, there is a large, visible bottle on the left which sits IN the engine bay. This is not present in the series 3 and seems to be located just behind the suspension strut, above the wheelarch.
I would hope that the series 2 would have space behind the strut for a bottle, too - after all, fuel injected series 2's were released, with airboxes where the bottle would normally go, so the space must be there in both series 2 and 3.
If the space IS there in the carbed series 2's, how do I get to it to put the bottle there? I also need to know this so I can get the bottle out of the series 3 as well, naturally. _________________ Hugh B
'98 145 QV
'89 33 1.7 16V Veloce SportWagon (in hibernation)
16V conversion pics/videos - now updated with extra pictures and explanations |
|
Back to top |
|
|
ChrisC Alfa Sprint
Joined: 13 Mar 2003 Posts: 152 Location: Frome
|
Posted: Mon Apr 14, 2003 11:20 pm Post subject: Chris |
|
|
The series 3 washer bottle bolts to a small piece of metal that goes between if i remember, the inner and outer wing. Id guess that that part at least would not convert exactly to a series 2. I have a great picture of this somewhere but not in a position to upload it presently. _________________ Alfa Sprint QV - Gone to a better home and in happier health for it
Silver Lancia Beta HPE Volumex - under restoration |
|
Back to top |
|
|
Admin Site Admin
Joined: 19 Feb 2003 Posts: 1223 Location: Stafford, UK
|
Posted: Mon Apr 14, 2003 11:27 pm Post subject: |
|
|
Hi
For this I would be tempted to use one of the bag washer bottles. These are readily available for kit cars, and are very similar to what was fitted to the early Sud. OK you loose the massive capacity of the original 33 washer bottle (out of fluid, must be time for a service )
The series 3 washer bottle lives in the wheel arch hidden behind the plastic wheel arch liner, and to filler neck pokes through the inner wing just behind the r/h strut
All the best
Keith |
|
Back to top |
|
|
Lee Alfa Sprint
Joined: 13 Mar 2003 Posts: 150 Location: Essex UK
|
Posted: Tue Apr 15, 2003 6:08 pm Post subject: |
|
|
If you do go the bag route then just go to a scrap yard, the Fiat uno uses one.
Lee _________________ `97 155 2.0 16v sport
`91 33 1.7 I.E |
|
Back to top |
|
|
|