View previous topic :: View next topic |
Author |
Message |
james Alfasud
Joined: 01 Apr 2003 Posts: 82
|
Posted: Mon Sep 13, 2004 12:18 pm Post subject: Finaly i got my 33 |
|
|
Well i have been here for over a year and now i have a 33.
Good old ebay. i picked up a 1990 H reg S3 1.7 8v
On saturday, we fixed the blow in the manifold, Crack nearly all the way around the hole pipe.
Put some water in the coloing system and tried to flush all the brown s**t out too.
Found out the problem with the brakes. a Split brake hose near the compensator. So this should be a quick repair
As for the rust on the floor, well there gromits on each bit of the floor. and thay have fallen out, some are rusty, but a little plate on each one will sort thay out. Also a little bit on the N/S sill needs a plate on it.
Apart from theses little bit, it should go though the MOT.
Sunday.....
We got a mate to make up a new brake line. So there all working now.
Rippped out and old alarm but left the imboliser.
Took out the heater matix, to see why the fan did't work. So i found out thay had cut the wire to the fan and wired it up to a cheap/crap/s**t/switch on the dash, which thay had to cut the dash to fit and ran the "new" cables under the battery and all though out the dask, just to get the fan working on one speed. The silly wankers how fitted the switch should have cheaked the fuse was the right ampage.. Its 20A not 10A hence it kept blowing. ...Rant over... (now we have to wait and see if it goes again)
We found loads and loads of rusty water in the rad, hopfuly we have got it all out.
So new it has brakes we can test drive it and its damn fast for a boxer 8v. and feels like a prober little racer too. This car willl be loads of fun.
I did take some pic's but left the camera in the car.
Not bad for only having the car under 48 hours.
So tomorrow night getting on with the rust on the floor and sill.
So what do you guys think? _________________ Umm thinking of getting a Alfa 33 P4 16v cloverleaf.
I would have done but i could not see any nice ones, so on the end i went for a 145 QV. Very happy with it
But still looking for a nice cheep 33 cloverleaf. |
|
Back to top |
|
|
alfaqv33 Alfasud
Joined: 19 Apr 2004 Posts: 44
|
Posted: Mon Sep 13, 2004 8:20 pm Post subject: |
|
|
wow, nice 33, and the wheels are perfect!! |
|
Back to top |
|
|
Wizz Alfa Sprint
Joined: 14 Mar 2004 Posts: 101 Location: Denmark
|
Posted: Tue Sep 14, 2004 12:50 pm Post subject: |
|
|
Congratulations on your buy! It looks mighty fine to me, and yes, the rims really fit the car. ^_^ _________________ //Wizz
Alfa 33, 1.5 IE (1992) (Series 3)... now with 1.7 IE |
|
Back to top |
|
|
james Alfasud
Joined: 01 Apr 2003 Posts: 82
|
Posted: Wed Sep 15, 2004 12:03 pm Post subject: |
|
|
Well all the rust is all done. MOT later in the week. _________________ Umm thinking of getting a Alfa 33 P4 16v cloverleaf.
I would have done but i could not see any nice ones, so on the end i went for a 145 QV. Very happy with it
But still looking for a nice cheep 33 cloverleaf. |
|
Back to top |
|
|
looking for a 33 Guest
|
Posted: Thu Sep 30, 2004 12:29 pm Post subject: |
|
|
i was watching that on ebay, u got it for a good price! good luck with the mot, looks sweet |
|
Back to top |
|
|
james Alfasud
Joined: 01 Apr 2003 Posts: 82
|
Posted: Fri Oct 01, 2004 12:10 am Post subject: |
|
|
Well it failed the MOT last saturday.
I need to get two new shocks for the passenger side. But thats all it failed on, which is good. _________________ Umm thinking of getting a Alfa 33 P4 16v cloverleaf.
I would have done but i could not see any nice ones, so on the end i went for a 145 QV. Very happy with it
But still looking for a nice cheep 33 cloverleaf. |
|
Back to top |
|
|
James Granger Alfa 33
Joined: 10 Apr 2003 Posts: 302
|
Posted: Sat Oct 02, 2004 6:01 pm Post subject: |
|
|
Looks nice - but is that rust around the fuel filler cap? Also check the tyre pressure on the LHS front tyre - looks kind of low.
Seats and interior look mint!!! |
|
Back to top |
|
|
james Alfasud
Joined: 01 Apr 2003 Posts: 82
|
Posted: Mon Oct 04, 2004 12:06 am Post subject: |
|
|
Yeah theres loads of rit around there,
But that will be sort in its own time.
I just need to sort out these konis under 3 years old and 18K miles and two failed the MOT. But im going to get a 2nd opinoin on them. _________________ Umm thinking of getting a Alfa 33 P4 16v cloverleaf.
I would have done but i could not see any nice ones, so on the end i went for a 145 QV. Very happy with it
But still looking for a nice cheep 33 cloverleaf. |
|
Back to top |
|
|
|