Alfa Pages Forum Index Alfa Pages
A forum for help with the Alfasud And Alfa 33
 

Water sprinklers

 
Post new topic   This topic is locked: you cannot edit posts or make replies.    Alfa Pages Forum Index -> Boxer Workshop
View previous topic :: View next topic  
Author Message
Horizontally Opposed
Alfasud


Joined: 29 Aug 2004
Posts: 44
Location: Greece

PostPosted: Mon Apr 11, 2005 7:31 pm    Post subject: Water sprinklers Reply with quote

Hi all!

My water sprinklers suddently stopped working today.

The sprinkler tank is filled with water but it sounds like the pump is not working.

What do you suppose is wrong?
Is there a fuse for the sprinkler pump or a cable I should check somewhere?

Thanks!
Back to top
View user's profile Send private message
LDA
Alfa 33


Joined: 28 Nov 2004
Posts: 276
Location: France

PostPosted: Tue Apr 12, 2005 4:42 pm    Post subject: Reply with quote

check for rust on the plug that goes to the pump. the pumps are very cheap to buy. you can test it by running some power to it from a spare battery. if its dead then you can get replacement motors from most major motor factors.

maybe if you have a rear washer too, you could swap the pumps to test the system.

L.
_________________
A good workman allways blames his sh*t tools.
Back to top
View user's profile Send private message
paulhide
P4


Joined: 20 Dec 2003
Posts: 1607
Location: Oh Beautiful Billingham

PostPosted: Tue Apr 12, 2005 6:56 pm    Post subject: Reply with quote

Just had exactly the same problem on my latest white series 2. Not fuse as this is same fuse as for wipers. If not rusty contacts as Luke has said can be break in the wires leading to it, as has just happened to me. I cut the wires and added new contacts to the pump. Also then my jets weren't working very well so pulled motor out of water tank and cleaned the little plastic perforated disc/filter at the end which was covered in gunk. With a tiny nail you can lever it out. Now the jets are full on. Very Happy
_________________
Owner's Club 33 Registrar. Now from P4 & S2 1.7 QV
http://www.alfa-pages.co.uk/viewtopic.php?t=5188
Back to top
View user's profile Send private message Send e-mail
Ben_nz
Gold Cloverleaf


Joined: 30 Sep 2003
Posts: 575
Location: Auckland, New Zealand

PostPosted: Wed Apr 13, 2005 7:36 am    Post subject: Reply with quote

My window washers weren't working because the one-way valve in the tube going to the jet nozzles wasn't letting water through. I just took it out and rejoined the tube by dipping one of the ends in hot water until I could fit it over the other.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   This topic is locked: you cannot edit posts or make replies.    Alfa Pages Forum Index -> Boxer Workshop All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum