View previous topic :: View next topic |
Author |
Message |
lee16v 16 Valve

Joined: 29 Jun 2005 Posts: 1429 Location: Devon, UK
|
Posted: Wed Aug 09, 2006 7:25 pm Post subject: Drum brake adjusters |
|
|
Hi,
Does anyone have the adjuster bars that sit between the shoes in a drum brake set up. Mine are shafted and it's a pain keep doing it by hand for the MOT
It's for a 93 16v
Cheers, Lee |
|
Back to top |
|
 |
bobbber P4
Joined: 14 May 2003 Posts: 2162 Location: The Greatest Town on Earth - Swadlincote, UK
|
Posted: Thu Aug 10, 2006 11:49 am Post subject: |
|
|
Sounds like mine Lee!!!!!
I'm not sure how well this 'self adjusting' system works anyway.
I think they are still available new.
The lever set 60750210 is £40 and new spring set (should you need them) 60750208 is £20 from your local happy Alfa dealership :
Hope that helps.
Bob _________________ Fiat Bravo 165 Sport |
|
Back to top |
|
 |
lee16v 16 Valve

Joined: 29 Jun 2005 Posts: 1429 Location: Devon, UK
|
Posted: Fri Aug 11, 2006 4:40 pm Post subject: |
|
|
Thanks for the reply Bob
£40 is a whole stack of pennies..........Tweeking them once a year aint so bad!! |
|
Back to top |
|
 |
bobbber P4
Joined: 14 May 2003 Posts: 2162 Location: The Greatest Town on Earth - Swadlincote, UK
|
Posted: Fri Aug 11, 2006 4:51 pm Post subject: |
|
|
Drill a large hole in the drum - and you can adjust it with a screwdriver without taking the bearings and drum and nut off!!!!!?
Bob _________________ Fiat Bravo 165 Sport |
|
Back to top |
|
 |
bobbber P4
Joined: 14 May 2003 Posts: 2162 Location: The Greatest Town on Earth - Swadlincote, UK
|
Posted: Fri Aug 11, 2006 4:53 pm Post subject: |
|
|
Not sure about the safety of doing that - or the wheel balancing though _________________ Fiat Bravo 165 Sport |
|
Back to top |
|
 |
lee16v 16 Valve

Joined: 29 Jun 2005 Posts: 1429 Location: Devon, UK
|
Posted: Fri Aug 11, 2006 5:00 pm Post subject: |
|
|
Could put the hole on the backplate with a grommet........ i think you 're on to something here Bob!! |
|
Back to top |
|
 |
bobbber P4
Joined: 14 May 2003 Posts: 2162 Location: The Greatest Town on Earth - Swadlincote, UK
|
Posted: Fri Aug 11, 2006 5:07 pm Post subject: |
|
|
Sounds like a plan!
 _________________ Fiat Bravo 165 Sport |
|
Back to top |
|
 |
Guest
|
Posted: Sat Aug 12, 2006 12:21 am Post subject: |
|
|
you can adjust them through the wheel bolt hole, right side adjusts up to tighten and left side is down to tighten. Just done mine ready for mot  |
|
Back to top |
|
 |
|