| View previous topic :: View next topic |
| Author |
Message |
BILL
Alfa Sprint
Joined: 04 May 2003
Posts: 154
Location: TRIPOLIS GREECE
|
 Posted: Mon Jul 07, 2003 7:36 pm Post subject: HOW do you ... |
 |
|
... remove that plastic plate under the accelerator pedal (the pedal stops there when you push the pedal to the metal,  all the time that is).
thanks!! |
|
| Back to top |
|
 |
Ken McCarthy
Alfa Sprint
Joined: 16 May 2003
Posts: 153
Location: Brisbane, Australia
|
| Posted: Mon Jul 07, 2003 11:21 pm Post subject: |
|
|
Bill
On the 33 16V there is a steel plate under the accellerator pedal (on the Sprint there is an adjustable bolt). If this plate is what you mean, leave it but make sure it is bolted down fully. If you don't have full throttle travel, adjust it at the engine or replace the cable if it is worn.
Regards
_________________
Ken McCarthy - 16V Sprint |
|
| Back to top |
|
|
Allan (DK)
Guest
|
| Posted: Tue Jul 15, 2003 9:48 am Post subject: |
|
|
Hi Bill.
In my 33 16V it is a plastic thing under the throttle. There should be a round part in the middle, which you should "pull" out. Beneath that there is a screw and when that is removed, the plastic thing should be loose. I wrecked mine, trying to remove it....
Allan (DK)
1990 33 16V QV
1994 164 Q4 (awaiting number plates...) |
|
| Back to top |
|
|
|
