View previous topic :: View next topic |
Author |
Message |
BigAl P4
Joined: 06 May 2003 Posts: 2990 Location: U.K Surrey
|
Posted: Sun Apr 27, 2008 12:37 pm Post subject: 16v engine stabiliser |
|
|
Hello again:) preparing for my head removal I removed my engine stabiliser knowing that it is also fookd and needs replacing, as the middle part comes away from the bush.
Is the bush sold seperatly or is it sold as complete stabiliser? I have never replaced one on a 16v before. _________________ x2 33 16v
pictures http://www.alfa-pages.co.uk/viewtopic.php?t=5203 |
|
Back to top |
|
|
gritsop Green Cloverleaf
Joined: 23 Apr 2003 Posts: 766 Location: Ekali, Athens - Greece
|
Posted: Sun Apr 27, 2008 3:39 pm Post subject: |
|
|
The side engine mount (stabilizer bar) is sold as a complete unit. The rubber bush is not pressed in but it is formed in the bar during production.
Regards, _________________ Thanassis Gritsopoulos
1991 Alfa 33 1.4 IE
2001 Alfa 147 1.6 Distinctive
http://www.alfa-restoration.co.uk
Parts Shop: www.alfa-restoration.co.uk/shop |
|
Back to top |
|
|
BigAl P4
Joined: 06 May 2003 Posts: 2990 Location: U.K Surrey
|
|
Back to top |
|
|
BigAl P4
Joined: 06 May 2003 Posts: 2990 Location: U.K Surrey
|
Posted: Tue Oct 26, 2010 9:01 pm Post subject: |
|
|
I was originally thinking of getting my engineer guy to press out the ser 3 bush and make something to accomodate the locating part for the actual bar.
I was talking to Shrew about this and he thought of using another stabiliser on the other side.
I was thinking 2 ser 2 stabilisers could be used, the forces would be halfed and would not need to be as beefy as a ser 3, could someone post a picture of the way the ser 2 is attached to the block, as I cant remember and I will post a pic of the whole ser 3.
I am wondering if the ser 2 would work on the ser 3.
I can see a pic in bobbers post here
http://www.alfa-pages.co.uk/viewtopic.php?t=5472&highlight=stabiliser
anyone got any measurements? _________________ x2 33 16v
pictures http://www.alfa-pages.co.uk/viewtopic.php?t=5203 |
|
Back to top |
|
|
Admin Site Admin
Joined: 19 Feb 2003 Posts: 1223 Location: Stafford, UK
|
Posted: Wed Oct 27, 2010 11:16 am Post subject: |
|
|
Hi
As an aside, not sure it is necessary. The Minaris used to omit that bar.
All the best
Keith _________________ I owe, I owe, its off to work we go.
Bimota Forum
Stafford Christmas Lights
|
|
Back to top |
|
|
BigAl P4
Joined: 06 May 2003 Posts: 2990 Location: U.K Surrey
|
|
Back to top |
|
|
Admin Site Admin
Joined: 19 Feb 2003 Posts: 1223 Location: Stafford, UK
|
Posted: Wed Oct 27, 2010 3:19 pm Post subject: |
|
|
Hi
Issue seems to be one person managed to get an exhaust issue with it
As to your idea of using a 2nd one on the other side. Not sure this would work. Being a small skinny bar I assume it works by being under tension, and on the other side it would probably be under compression in the same position with the bar likely easily bending.
All the best
Keith _________________ I owe, I owe, its off to work we go.
Bimota Forum
Stafford Christmas Lights
|
|
Back to top |
|
|
BigAl P4
Joined: 06 May 2003 Posts: 2990 Location: U.K Surrey
|
Posted: Wed Oct 27, 2010 5:33 pm Post subject: |
|
|
Surely there's not that much force on it, my thinking was that when the engine twists in one direction it would pull on one side and compress the bushes on the other side and vice versa _________________ x2 33 16v
pictures http://www.alfa-pages.co.uk/viewtopic.php?t=5203 |
|
Back to top |
|
|
33bits 16 Valve
Joined: 23 May 2009 Posts: 1067 Location: Clevedon. North Somerset
|
Posted: Wed Oct 27, 2010 5:42 pm Post subject: |
|
|
A friend of mine has a 33 track car & he has fitted a 2nd bar. He seems to think it "slightly" helps eliminate engine movement under acceleration & is there as a back up in case the original 1 breaks.
He has had it there for about 2 years now, no probs yet. _________________ 155 sportpack
33 16v Sportwagon
33 Permanent 4
33 16v (for sale)
156 JTS sportwagon
contact me for any 33 parts. Alex, 07896-327708
|
|
Back to top |
|
|
BigAl P4
Joined: 06 May 2003 Posts: 2990 Location: U.K Surrey
|
Posted: Wed Oct 27, 2010 5:48 pm Post subject: |
|
|
cool, thats good to know, I think the ser 3 ones are no longer available, the ser 2's are just rubber bushes so should be easier to replace. _________________ x2 33 16v
pictures http://www.alfa-pages.co.uk/viewtopic.php?t=5203 |
|
Back to top |
|
|
BigAl P4
Joined: 06 May 2003 Posts: 2990 Location: U.K Surrey
|
|
Back to top |
|
|
Oggie Green Cloverleaf
Joined: 06 Mar 2008 Posts: 811 Location: Whitehill
|
Posted: Wed Apr 13, 2011 7:03 pm Post subject: |
|
|
It was me who had the rubber go and twist and snap my stainless steel manifold 2 inches after the flange on port no 4 I think, bear in mind if it wasn't needed it wouldn't be there, if like me you are sticking 75% more power from the engine things are bound to be more stressed therefore nessesary to be in good shape. I know after the hassle of repairing the exhaust its not worth neglecting a small cheap rubber bush. _________________ PHAT 33 |
|
Back to top |
|
|
BigAl P4
Joined: 06 May 2003 Posts: 2990 Location: U.K Surrey
|
|
Back to top |
|
|
|