| View previous topic :: View next topic |
| Author |
Message |
BigAl
P4
Joined: 06 May 2003
Posts: 2996
Location: U.K Surrey
|
 Posted: Tue May 18, 2010 9:59 am Post subject: differences between ser 1 & 2 and 3 rear suspension arms |
 |
|
I know the ser 3 has only leading arms and the ser 2 has leading and trailing arms.
Are the leading arms from ser 2 and 3 the same.
For those that dont know, leading arms go from the front of car to the rear axle to the axle and the trailing arms go from the axle to the rear of the car.
On a ser 2 there are 2 infront and 2 behind, on a ser 3 all 4 are infront.
Are 2 of them interchangeable?
Thanks in advance.
_________________
x2 33 16v
pictures http://www.alfa-pages.co.uk/viewtopic.php?t=5203 |
|
| Back to top |
|
 |
paulhide
P4
Joined: 20 Dec 2003
Posts: 1607
Location: Oh Beautiful Billingham
|
| Posted: Tue May 18, 2010 4:35 pm Post subject: |
|
|
series 2 leading arms part 60501937 trailing 60501936
series 3 lower leading arms part 60501560
higher are sided - 60538868 + 60538869
_________________
Owner's Club 33 Registrar. Now from P4 & S2 1.7 QV
http://www.alfa-pages.co.uk/viewtopic.php?t=5188 |
|
| Back to top |
|
|
Oggie
Green Cloverleaf
Joined: 06 Mar 2008
Posts: 811
Location: Whitehill
|
| Posted: Tue May 18, 2010 6:42 pm Post subject: |
|
|
The very last of the series 2 production run had the same config as the series 3, I doubt any still exisit in this country tho.
_________________
PHAT 33 |
|
| Back to top |
|
|
BigAl
P4
Joined: 06 May 2003
Posts: 2996
Location: U.K Surrey
|
| Posted: Tue May 18, 2010 11:00 pm Post subject: |
|
|
Thanks guys. I wonder how they got the ser 3 setup to fit the ser 2, i guess they changed the mounting point as im sure you couldnt just swap it over.
_________________
x2 33 16v
pictures http://www.alfa-pages.co.uk/viewtopic.php?t=5203
Last edited by BigAl on Wed May 19, 2010 9:13 pm; edited 1 time in total |
|
| Back to top |
|
|
ZeNiTh-PbArM
Alfa 33
Joined: 14 Mar 2003
Posts: 388
Location: Paris, France
|
| Posted: Tue May 18, 2010 11:29 pm Post subject: |
|
|
Hi,
| Quote: |
| The very last of the series 2 production run had the same config as the series 3, I doubt any still exisit in this country tho. |
I know of one here. This car also has a few of the series 3 features, such as mounting points for installing front reinforcement bars between the firewall and inner wing (those black bars that can be removed to help replacing plugs on 16Vs) ; also the shield around the instrument cluster is that of the series 3.
regards,
zp |
|
| Back to top |
|
|
|
