Alfa Pages Forum Index Alfa Pages
A forum for help with the Alfasud And Alfa 33
 

Front wiper motor replacement

 
Post new topic   Reply to topic    Alfa Pages Forum Index -> General
View previous topic :: View next topic  
Author Message
Brit01
Gold Cloverleaf


Joined: 24 May 2010
Posts: 665

PostPosted: Mon May 24, 2010 5:01 pm    Post subject: Front wiper motor replacement Reply with quote

Hi,

Is it possible to change the wiper motor on my 33 (1988) for a motor from another car?

Looking for a cheap replacement. Possibly from a Gol, fiesta, fiat, corsa etc.

My wipers shorted out a while ago, they work now but they are much slower.

I expect the impedance of the motor increased after they over heated and shorted.
Back to top
View user's profile Send private message
Oggie
Green Cloverleaf


Joined: 06 Mar 2008
Posts: 811
Location: Whitehill

PostPosted: Mon May 24, 2010 6:30 pm    Post subject: Reply with quote

A lot of the motors for windscreen wipers are very similar, i bet a trip down the scrap yard with your motor in hand should find a good comparison, although going for a newer motor would probably benefit the speed but check the voltage rating and be aware the wiring might not be up to the job.
_________________
PHAT 33
Back to top
View user's profile Send private message Send e-mail Visit poster's website
33bits
16 Valve


Joined: 23 May 2009
Posts: 1067
Location: Clevedon. North Somerset

PostPosted: Mon May 24, 2010 8:43 pm    Post subject: Reply with quote

I've heard that the motor from a Renault 19 will fit a 33 although i have never tried this. If you get stuck i have spare 33 wiper motors i can send you. Very Happy
_________________
155 sportpack
33 16v Sportwagon
33 Permanent 4
33 16v (for sale)
156 JTS sportwagon
contact me for any 33 parts. Alex, 07896-327708
Back to top
View user's profile Send private message Send e-mail
Admin
Site Admin


Joined: 19 Feb 2003
Posts: 1223
Location: Stafford, UK

PostPosted: Fri Jun 04, 2010 3:58 pm    Post subject: Reply with quote

Hi

Can also be worth stripping the motor and cleaning it up. Had to do this on my Sprint many years ago.

All the best

Keith
_________________
I owe, I owe, its off to work we go.
Bimota Forum
Stafford Christmas Lights
Back to top
View user's profile Send private message Send e-mail
Brit01
Gold Cloverleaf


Joined: 24 May 2010
Posts: 665

PostPosted: Mon Jun 07, 2010 1:12 am    Post subject: Reply with quote

Yes I think this will have to be done.

I'll check all the linkages/gear etc.

Never done this before and don't know what to expect but I like a challenge.
Back to top
View user's profile Send private message
eagle3
Alfa 33


Joined: 11 Nov 2007
Posts: 402
Location: France

PostPosted: Mon Jun 07, 2010 5:34 am    Post subject: Reply with quote

Check the condition of the circuit(contacts at switch, relay, fuse and earth; wiring) before writing off the motor.
_________________
Alfa33 QO 1984
Alfa33 1.3i.e. 1994
Back to top
View user's profile Send private message
Brit01
Gold Cloverleaf


Joined: 24 May 2010
Posts: 665

PostPosted: Wed Jun 09, 2010 12:09 pm    Post subject: Reply with quote

Hi guys,

Having a look at the plastic cover I'm not sure how to remove it to access the linkage/motor.

Has anyone got any photos or advice on the best way to remove the plastic cover?

Thanks
Back to top
View user's profile Send private message
eagle3
Alfa 33


Joined: 11 Nov 2007
Posts: 402
Location: France

PostPosted: Wed Jun 09, 2010 12:53 pm    Post subject: Reply with quote

IIRC it's fairly self-evident. Just unscrew the screws and disconnect the washer pipe. The five nipples under the bonnet are push-fit which need to be prised off with a some amount of care.
_________________
Alfa33 QO 1984
Alfa33 1.3i.e. 1994
Back to top
View user's profile Send private message
Brit01
Gold Cloverleaf


Joined: 24 May 2010
Posts: 665

PostPosted: Wed Jul 07, 2010 11:44 am    Post subject: Reply with quote

Just want to double check with you guys.

I've got the opportunity of buying a complete wiper set (motor, linkage, arms etc) from a S3 1993 for a good price.

I want to install this on my S2 1988 car (as mine are crap, half burned out motor etc).

I was told this is possible and that they are smoother and quieter. Just wanted to confirm before I hand over my hard earned money.

Cheers
_________________
S2 33 1988 1.7 QV
Dellorto DRLA40 (32mm venturi)
Back to top
View user's profile Send private message
Oggie
Green Cloverleaf


Joined: 06 Mar 2008
Posts: 811
Location: Whitehill

PostPosted: Wed Jul 07, 2010 1:13 pm    Post subject: Reply with quote

yep thats right, i did this a few years ago and very easy swap out, just need to use series 3 wiper arms as i think they differ in size.
_________________
PHAT 33
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Brit01
Gold Cloverleaf


Joined: 24 May 2010
Posts: 665

PostPosted: Wed Jul 07, 2010 1:22 pm    Post subject: Reply with quote

Thanks Oggie.

Good to know. Will pick these up them for about 60 quid.

Also getting some interior door seals and exterior trims.
I expect these will be the same also.
_________________
S2 33 1988 1.7 QV
Dellorto DRLA40 (32mm venturi)
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Alfa Pages Forum Index -> General All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum