View previous topic :: View next topic |
Author |
Message |
Oggie Green Cloverleaf
Joined: 06 Mar 2008 Posts: 811 Location: Whitehill
|
Posted: Thu Jul 16, 2015 10:06 pm Post subject: Cam shaft locking tools |
|
|
As per title does anyone have these?. _________________ PHAT 33 |
|
Back to top |
|
|
Rich B Alfa 33
Joined: 19 May 2003 Posts: 386 Location: Southampton
|
Posted: Thu Jul 16, 2015 10:16 pm Post subject: |
|
|
Which type do you need? I have a 16v one _________________ 1994 33 16v
2008 Alfa 147 Ducati Corse Q2 |
|
Back to top |
|
|
Oggie Green Cloverleaf
Joined: 06 Mar 2008 Posts: 811 Location: Whitehill
|
Posted: Fri Jul 17, 2015 7:07 am Post subject: |
|
|
For an 8v Rich. _________________ PHAT 33 |
|
Back to top |
|
|
Rich B Alfa 33
Joined: 19 May 2003 Posts: 386 Location: Southampton
|
Posted: Fri Jul 17, 2015 12:51 pm Post subject: |
|
|
ok, sorry don't have one for an 8v _________________ 1994 33 16v
2008 Alfa 147 Ducati Corse Q2 |
|
Back to top |
|
|
Oggie Green Cloverleaf
Joined: 06 Mar 2008 Posts: 811 Location: Whitehill
|
Posted: Fri Jul 17, 2015 9:36 pm Post subject: |
|
|
No one does one and as far as Im aware after talking to 2 Alfa garages never have. _________________ PHAT 33 |
|
Back to top |
|
|
lee16v 16 Valve
Joined: 29 Jun 2005 Posts: 1429 Location: Devon, UK
|
Posted: Fri Jul 17, 2015 10:33 pm Post subject: |
|
|
Could you not make some Iain?
I made some for my 156 when I did a cambelt change on it. I drew around the cam profile against some ally block, ground them out and bolted them on. They're probably really cheap to buy now but at the time they were about £40. |
|
Back to top |
|
|
|