Alfa Pages

Rich B · Posted: Fri Jul 27, 2007 11:09 am Post subject: Fitting Superchip

Just got a Superchip for my car and wondered if anyone had fitted one? I opened the ECU and it appears that the standard chip is soldered in. I thought it just pulled out and the new one pushed in with no soldering required. Anyone know if this is the case?

Scott Sander · Posted: Fri Jul 27, 2007 1:10 pm Post subject:

Hi,

My 16V has a socket that you can remove the original eprom in and replace it with another eprom, which I have done. Got a picture we can look at?
_________________
Scott Sander
'91 Alfa 33 Boxer 16V Monza - Awesome
http://www.sanderfamily.com

Rich B · Posted: Fri Jul 27, 2007 2:26 pm Post subject:

I'll try to sort one out, thanks Scott

tvatavuk · Posted: Fri Jul 27, 2007 3:07 pm Post subject:

Are you sure you re looking into right chip in your motronic?

Instalation manual for Squadra chip Smile

http://www.squadra-tuning.com/NL/Inbouwhandleidingen/Plaats_van_de_ECU/Plaats_van_de_ECU.html
_________________
Tino Vatavuk
Little black dress which replaced Alfa Romeo 33 S 16v Permanent 4 GMo

Rich B · Posted: Sat Jul 28, 2007 10:47 am Post subject:

yeah I'd already looked at the squadra site for the installation guide, thanks Tino - I think I've got the right chip, I held the Superchip against it and it was the same size but I'll check again

Rich B · Posted: Wed Aug 01, 2007 11:37 am Post subject:

I've worked it out now - the top part of the chip just lifts away and the new one pushes into place, easy really! thanks for the help