| View previous topic :: View next topic |
| Author |
Message |
johnboy
16 Valve
Joined: 26 Jun 2003
Posts: 1061
Location: margate U.K
|
 Posted: Thu Jun 26, 2003 9:36 pm Post subject: 16v conversion won't start |
 |
|
Hi can any one help with my nightmare,i have put a 16v in a series 2 green clover, everything is powered up,but im getting a very very weak spark from the coil,but nothing out of the diss, i have put everything on my clover from the 16v.but it just turn's over and that's it.is it the ecu not triggering the coil which mean's it's nackered or something else? cos it's doing an alfa nut's headin!! 
cheer's johnboy 33 lover |
|
| Back to top |
|
 |
Ken McCarthy
Alfa Sprint
Joined: 16 May 2003
Posts: 153
Location: Brisbane, Australia
|
| Posted: Fri Jun 27, 2003 12:47 am Post subject: |
|
|
I know it sounds basic but it caught me out because my battery is in the boot, but have you got the main earth from the block properly installed.
_________________
Ken McCarthy - 16V Sprint |
|
| Back to top |
|
|
johnboy
16 Valve
Joined: 26 Jun 2003
Posts: 1061
Location: margate U.K
|
| Posted: Sun Jun 29, 2003 7:15 pm Post subject: |
|
|
| Ken McCarthy wrote: |
| I know it sounds basic but it caught me out because my battery is in the boot, but have you got the main earth from the block properly installed. |
Hi i'll check it out tomorrow,but i have power to every thing.it's doing my head in! thank's for a reply john |
|
| Back to top |
|
|
Ken McCarthy
Alfa Sprint
Joined: 16 May 2003
Posts: 153
Location: Brisbane, Australia
|
| Posted: Sun Jun 29, 2003 10:56 pm Post subject: |
|
|
I had power to everything too, but it was earthing back through the headlight wires and there wasn't enough to fire the engine.
Good luck
_________________
Ken McCarthy - 16V Sprint |
|
| Back to top |
|
|
johnboy
16 Valve
Joined: 26 Jun 2003
Posts: 1061
Location: margate U.K
|
| Posted: Thu Jul 03, 2003 8:25 pm Post subject: |
|
|
| Ken McCarthy wrote: |
I had power to everything too, but it was earthing back through the headlight wires and there wasn't enough to fire the engine.
Good luck |
Hi ken,just got an alfa work shop cd,so hopefully should sort it out now i know what wire's are what,let you know when she fire's up.
cheer's john |
|
| Back to top |
|
|
|
