Alfa Pages Forum Index Alfa Pages
A forum for help with the Alfasud And Alfa 33
 

Ball Joint Problems

 
Post new topic   This topic is locked: you cannot edit posts or make replies.    Alfa Pages Forum Index -> Boxer Workshop
View previous topic :: View next topic  
Author Message
gritsop
Green Cloverleaf


Joined: 23 Apr 2003
Posts: 766
Location: Ekali, Athens - Greece

PostPosted: Mon Sep 22, 2003 7:42 pm    Post subject: Ball Joint Problems Reply with quote

Hi,

Today after replacing the yellow strut pan bearing under the lower cap of the shock absorber (relatively easy job if you have spring compressor), I discovered that the ball joint in the front suspension like the one I have indicated in the picture below has its rubber boot teared away - I would like to replace it and my question is :

Do the AR dealers sell it along with the semi-trailing link? or
can I just purchase a new ball joint and install it on the same link? or
simply purchase a new rubber boot and install it over the existing joint?


Thanks in advance,

_________________
Thanassis Gritsopoulos
1991 Alfa 33 1.4 IE
2001 Alfa 147 1.6 Distinctive

http://www.alfa-restoration.co.uk
Parts Shop: www.alfa-restoration.co.uk/shop


Last edited by gritsop on Mon Sep 22, 2003 11:17 pm; edited 1 time in total
Back to top
View user's profile Send private message Send e-mail
gritsop
Green Cloverleaf


Joined: 23 Apr 2003
Posts: 766
Location: Ekali, Athens - Greece

PostPosted: Mon Sep 22, 2003 9:56 pm    Post subject: Reply with quote

Sorry guys, I managed to solve the problem with the image Laughing

Sorry for the inconvenience
_________________
Thanassis Gritsopoulos
1991 Alfa 33 1.4 IE
2001 Alfa 147 1.6 Distinctive

http://www.alfa-restoration.co.uk
Parts Shop: www.alfa-restoration.co.uk/shop
Back to top
View user's profile Send private message Send e-mail
Scott Sander
Alfa 33


Joined: 20 Feb 2003
Posts: 419
Location: Sydney, Australia

PostPosted: Tue Sep 23, 2003 7:44 am    Post subject: Reply with quote

You should be able to buy these boots from a general auto place. There is no AR part number for them, so a AR dealer won't have a genuine one without the arm attached. Much cheaper to buy just the boot.

Worth checking the upper boot as well, although they are different sizes.
_________________
Scott Sander
'91 Alfa 33 Boxer 16V Monza - Awesome
http://www.sanderfamily.com
Back to top
View user's profile Send private message Visit poster's website
BILL
Alfa Sprint


Joined: 04 May 2003
Posts: 154
Location: TRIPOLIS GREECE

PostPosted: Tue Sep 23, 2003 12:02 pm    Post subject: Reply with quote

Gritsop i ve send you email
Back to top
View user's profile Send private message Send e-mail
gritsop
Green Cloverleaf


Joined: 23 Apr 2003
Posts: 766
Location: Ekali, Athens - Greece

PostPosted: Wed Sep 24, 2003 6:54 pm    Post subject: Reply with quote

Hi,

I managed to find today only the ball joint in a AR dealer store. It is not a AR part number , it is a TRW one designed for the 33 costing 24 €. AR sells it along with the semi-trailing link at a cost of 115€.

I ll have to break away the tree blind rivets that hold the old one in the link and setup the new one by using the tree stainless steel bolts that come along with the spare ball joint.

However I also checked to find only a brubber boot but in vain - the companies do not sell anymore these parts - They sell it as a whole spare part.

Write to you soon - Regards,
_________________
Thanassis Gritsopoulos
1991 Alfa 33 1.4 IE
2001 Alfa 147 1.6 Distinctive

http://www.alfa-restoration.co.uk
Parts Shop: www.alfa-restoration.co.uk/shop
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   This topic is locked: you cannot edit posts or make replies.    Alfa Pages Forum Index -> Boxer Workshop All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum