| View previous topic :: View next topic |
| Author |
Message |
Oggie
Green Cloverleaf
Joined: 06 Mar 2008
Posts: 811
Location: Whitehill
|
 Posted: Mon Sep 01, 2008 7:40 pm Post subject: Wiring for radiator...... |
 |
|
Hi all , I have a question for you, me s2 used to have a header tank with sensor for the coolant level, does any one remember what color the 2 wires are for this, the only ones that are currently wired together (straight through) are a blue and white cable to a brown one, are these the 2 I need to put back to the sensor?.
_________________
PHAT 33 |
|
| Back to top |
|
 |
paulhide
P4
Joined: 20 Dec 2003
Posts: 1607
Location: Oh Beautiful Billingham
|
| Posted: Tue Sep 02, 2008 1:41 pm Post subject: |
|
|
Well I've got one black and one brown and white going to the header tank sensor in my F reg TI.
I take it you're going for the cable on ebay. Don't forget that I've got a good 2ndhand one if it goes up too much.
_________________
Owner's Club 33 Registrar. Now from P4 & S2 1.7 QV
http://www.alfa-pages.co.uk/viewtopic.php?t=5188 |
|
| Back to top |
|
|
Oggie
Green Cloverleaf
Joined: 06 Mar 2008
Posts: 811
Location: Whitehill
|
| Posted: Wed Sep 03, 2008 9:01 pm Post subject: |
|
|
Sorted, found the brown/white cable cut short in the plastic loom casing, wired to the reservoir bottle only to find the sensor is foo....kaput, any one got one of these (bobber). 
_________________
PHAT 33 |
|
| Back to top |
|
|
bobbber
P4
Joined: 14 May 2003
Posts: 2162
Location: The Greatest Town on Earth - Swadlincote, UK
|
| Posted: Thu Sep 04, 2008 8:19 am Post subject: |
|
|
Yes, they are brown and white (bit slow replying to this one!  )
They're not very good anyway them there sensors - they clog up with bits from the coolant and stop sliding up and down properly after a while. Open the bonnet weekly and have a look is my advice.
Bob
_________________
Fiat Bravo 165 Sport |
|
| Back to top |
|
|
|
